Skull And Roses

Low water pressure is usually a common occurrence among houses but are not that noticed by the houseowners. It is noticeable when there are two or more fixtures which are turned on at the same time. Low water pressure may mean that there is a leak somewhere which means you are using up lots of water and your water bill may get very high. A low water pressure may be due to a number of factors, but it signifies that there is a problem on the system. Read on to know some common problems and how to resolve it.

Number one, you may have a problem with the pressure regulator. The pressure regulator is a bell-shaped device which is usually found in the main water pipe near the water meter. It basically controls the amount of water which is pumped into your home. There may come a time wherein the pressure regulator goes bad. This can either increase or decrease the water which comes into your home. This is a simple fix and can be resolved by a local plumber at a reasonable cost.

For any plumbing issue in your home call us at San Diego Plumbing. Our plumbers do the job right at our Pacific Beach plumbing office.

Another problem will be the accumulation of mineral deposits inside your pipes. Older homes use galvanized iron pipes which can be susceptible to deposits. Mineral deposits will clog up your pipes, resulting in lower water pressure. The replacement of pipes is what they do to solve this problem.

Third, there may be a loss of pressure because of leaks. Damage to your pipes which results in leaks will definitely give you low water pressure. This is because water goes out of different holes rather than the one it is intended to. You will have high water loss in your house due to this. What you can do is to check your water meter if it is moving when you have turned off all your water taps and shower heads.

Those are the common problems people have which results in low water pressure. Make sure you resolve these issues quickly to minimize your losses both in terms of water usage and money.